Roland RSS M-300 - Effect Input;Output Settings

100
Effects
Effects
Effect input/output settings
The FX INSERT/SOURCE SELECT popup and the FX DESTINATION
SELECT popup are used to select the input-source and output-
destination for the effect.
1.
Access the EFFECTS screen.
fig.ScrFXInSelBtn.eps
2.
Move the cursor to the FX INSERT/SOURCE SELECT popup
button L or R of the desired effect, and press [ENTER].
The FX INSERT/SOURCE SELECT popup will appear.
fig.ScrFXInSelGuide.eps
Current insert-destination/input-source indication
This indicates the current insert-destination channel or the
input-source channel for the effect.
Applicable effect indication
This indicates the effect to which the FX INSERT/SOURCE
SELECT popup applies.
Insert-destination/input-source select buttons
Here you can select the insert-destination channel or the
input-source channel for the effect.
The function buttons have the following operations:
1.
Access the EFFECTS screen.
fig.ScrFXOutSelBtn.eps
2.
Move the cursor to the FX DESTINATION SELECT popup
button L or R of the desired effect, and press [ENTER].
The FX DESTINATION SELECT popup will appear.
fig.ScrFXOutSelGuide.eps
Output channel select buttons
These select the output-destination channel for the effect.
You can select more than one output-destination channel.
Applicable effect indication
This indicates the effect to which the FX DESTINATION
SELECT popup applies.
Accessing the FX INSERT/SOURCE SELECT
popup
FX INSERT/SOURCE SELECT popup buttons
21 3
1
2
3
[F1 (CH 1–32 INSERT)]
Displays CH1–32 as the insert-destination
channel select buttons.
[F2 (BUS INSERT)] Displays AUX1–8, MTX1–4, and MAIN L/R/C as
the insert-destination channel select buttons.
[F3 (AUX OUT)] Displays AUX1–8 as the input-source channel
select buttons.
[F6 (SELECT NONE)] Clears the input-source selection.
[F8 (CLOSE)] Closes the popup.
Accessing the FX DESTINATION SELECT
popup
FX DESTINATION SELECT popup buttons
21 3
1
2
M-300_e.book 100 ページ ２０１０年６月２４日 木曜日 午後２時２６分