Roland RSS M-300 - Recording to Usb Memory

127
USB memory recorder
USB memory recorder
fig.ScrRcdrDestSelectGuide.eps
The RECORDER DESTINATION SELECT popup will appear.
Output-destination select buttons
Use these to select the output-destination channel for the
USB memory recorder.
You can select more than one output-destination channel.
Current destination indication
This indicates the current output-destination channel.
If more than one output-destination channel are exist, the
lowest number channel is shown.
The function buttons have the following operations:
3.
Move the cursor to the channel that you want to use as
the output-destination, and press [ENTER] to select it.
4.
Press [F8 (CLOSE)] to close the popup.
5. Make settings for the R channel in the same way.
1.
Press [REC].
The USB memory recorder will be in record-ready condition.
2.
Press [ ].
Recording to USB memory will begin, and the sub-display
area will indicate the recording time.
Pressing [REC] during recording lets you split the WAV file.
3.
To stop recording, press [ ].
1.
Press [ ] or [ ] to select a WAV file.
The selected WAV file is shown in the sub-display area.
2.
Press [ ].
The selected WAV file will play.
The sub-display area shows the playback time.
fig.SubDispRcdr.eps
Pressing and holding [ ] during playback rewinds the
playback, and pressing and holding [ ] fast-forwards it.
3.
To stop playback, press [ ].
1.
Access the RECORDER screen.
2.
From the song list, select the desired WAV file.
3.
Press [F5 (NAME EDIT)].
fig.ScrNameEdit.eps
The NAME EDIT popup will appear.
4. Use the name edit field to edit the file name.
5.
Press [F8 (OK)] to finalize the name you edited and close
the popup.
If you press [F7 (CANCEL)], your edits will be discarded and
the popup will close.
For details on name editing, refer to “Editing a name” (p. 37).
1.
Access the RECORDER screen.
2.
From the song list, select the WAV file that you want to
delete.
3.
Press [F6 (DELETE SONG)].
fig.ScrDelWavConf.eps
A message will ask you to confirm that you want to delete
the WAV file.
4.
Press [F8 (DELETE)] to delete the WAV file you selected in
step 2.
If you press [F7 (CANCEL)], the WAV file will not be deleted.
[F8 (CLOSE)]
Closes the popup.
Recording to USB memory
Playing WAV files from USB memory
2
1
1
2
Renaming a WAV file
Deleting a WAV file
M-300_e.book 127 ページ ２０１０年６月２４日 木曜日 午後２時２６分