Roland SH-32 - Producing Sound; Understanding Playing Modes: PATCH vs. PERFORMANCE; Switching Between Patch and Performance Modes

20
Producing Sound
Getting Started
About the Playing Modes of the SH-32
(PATCH/PERFORMANCE)
SH-32 offers two modes, allowing you to choose the one that is best for the purpose
you have in mind. You can either work with single “Patches” (Patch mode), or use
four Patches (including a Rhythm Set) to play in combination with one another
(Performance mode).
All procedures described in this Quick Start Manual assume that you’re in the Patch
mode, unless stated otherwise. Before operating the SH-32, first be sure that the
Patch mode is selected.
Switching Modes
fig.030
1
Press [PATCH/PERFORM].
When [PATCH/PERFORM] is not lighted, you are in Patch mode; if it’s lighted,
you’re in Performance mode.
Press the button to toggle between Patch mode and Performance mode.
1