Roland SH-32 - Playing Arpeggio with a Rhythm Pattern

39
Playing Arpeggio (Arpeggiator)
Quick Start
Playing the Arpeggio Together with a
Rhythm Pattern
In Performance mode, you can play the arpeggio while playing a rhythm pattern.
fig.026
1
Press [PATCH/PERFORM] to light up the button, and to enter
Performance mode.
In Performance mode, you can play four Parts (each with its own Patch assigned to
it) at the same time.
2
Press [EXIT] while pressing [PATCH/PERFORM], getting both buttons
to blink.
The unit is now in the Part Assign mode.
3
Set the Rhythm Set to Part 4.
1. Press [4/R].
[4/R] blinks.
2. Press [BANK], and then press [8/R].
3. Press [1/A]–[4/D] to select a Rhythm Set number.
The Rhythm Set number is shown in the display.
The Rhythm Set can only be set to Part 4.
Display
3, 68, 13 3, 10 5, 12
2, 4, 7, 9, 111, 2, 96, 13
See “Chapter 5. Using in
Performance Mode” (p. 71)
for details on Performance
mode.
See “Selecting the Patch for
Each Part (Part Assign
Mode)” (p. 71) for details on
the Part Assign mode.