Roland TrueVIS VG-540 - Installation Environment; Deciding On an Installation Site

2
Addition: 2. Included Items (P. 4)
The following included item has been added.
Included item
Cartridge-slot label (for white; 1)
* With the factory default settings, this label is axed to the platen at the location where the
front cover opens.
Change: Adjusting the Ink Tube and Afxing a Label (P. 15)
The title on P. 15 has been changed from "Step 5: Adjusting the Ink Tube and Afxing a Label
(Only When Using Four Colors)" to "Step 5: Adjusting the Ink Tube and Afxing a Label (When
Using Eight or Four Colors)" and the details have been changed as shown below.
Step 5: Adjusting the Ink Tube and Afxing a Label (When Using Eight or Four Colors)
Adjusting the ink tube
This work is required when using the machine with four colors (CMYK). This work must be per-
formed by a suitably qualied service technician. Never attempt to perform this work yourself.
* If you are using this machine with eight colors (CMYKLcLmLkW), only perform the work
under "Axing a label."
* If you are using the machine with seven colors (CMYKLcLmLk), proceed to "Step 6: Con-
necting the Cables."
CAUTION
Leave this work to a suitably qualied worker.
This procedure includes work near sources of electrical danger and
complex assembly work. Incorrect work may result in injury and
mechanical malfunction.
Afxing a label
This work is required when using the machine with eight colors (CMYKLcLmLkW) or with four
colors (CMYK).
Items used in this procedure
Included
item
CMYKLcLmLkW Cartridge-slot label (for white)
CMYK Cartridge-slot label (for four colors)
Additions and Changes to the Setup Guide