Additions and Changes to the Setup Guide
3
Change: Ink Filling (P. 19 to P. 25)
Details have been changed for the procedure on P. 19 to P. 25 so that eight colors (CMYKLcLm-
LkW) can be selected. Replace the information on P. 19 to P. 25 with that shown below.
Step 8: Ink Filling
IMPORTANT
First use cleaning liquid to clean the print heads, and then ll the printer with each color of ink.
• Be sure to use new TR cleaning liquid pouches and ink pouches.
• Never, under any circumstances, use anything other than the specied type of ink or cleaning liquid.
• The TR cleaning liquid pouches (2) that are included with the machine are used on P. 20, "2.
Clean the print heads using TR cleaning liquid."
• You must purchase the TR cleaning liquid pouch to be used on P. 24, "4. Fill the machine with TR
cleaning liquid."
separately. Purchase them from your authorized Roland DG Corp. dealer.
Items used in this procedure
Included item TR cleaning liquid pouches (2)
Items purchased separately Ink pouches (each color), TR cleaning liquid pouch (1)
1. Select the ink type.
A
Press [ ] or [ ] to select the ink type, and then press [ENTER].
SELECT INK TYPE
TrueVIS LkW
SELECT INK TYPE
TrueVIS 7C
SELECT INK TYPE
TrueVIS 4C
Name to select
Cyan (C)
Magenta (M)
Yellow (Y)
Black (K)
Light cyan (Lc)
Light magenta (Lm)
Light black (Lk)
White (W)
TrueVIS LkW
TrueVIS 7C
TrueVIS 4C
B
Press [ ] or [ ] to select [YES], and then press [ENTER].
TrueVIS LkW
[YES] NO
TrueVIS 7C
[YES] NO
TrueVIS 4C
[YES] NO
If the ink type is incorrect, select [NO], and then press [ENTER] to start again from step
A
.
To Next Page
Loading...
