Additions and Changes to the Setup Guide
4
C
Make sure the drain bottle is installed, and then press [ENTER].
P. 13, "Step 3: Installing the Drain Bottle"
INSTALL
DRAIN BOTTLE
The screen shown below appears, and then the machine starts the preparations for
the ink lling. The (approximate) remaining time for the procedure is displayed on the
screen. (The display shown below is an example. "20:00" = "20 minutes and 00 seconds")
FILLING INK...
>>>>> 20:00
MEMO
If the screen shown below appears here, pouch trays remain in the ink slots or in the
cleaning liquid slot. Remove all the pouch trays.
REMOVE CARTRIDGE
12345678
2. Clean the print heads using TR cleaning liquid.
A
Set the TR cleaning liquid pouch in the pouch tray.
CL
CL
Hook
Check that the hook has caught.
To Next Page
Loading...
