Roland V-Drums TD-20 - Kick Drum Editing Parameters; Snare Drum Editing Parameters; Tom Drum Editing Parameters; Hi-Hat Editing Parameters

33
Chapter 2. Drum Instrument Settings [INST]
Chapter 2
[INST]
KICK
fig.02-KICK_70
SNARE
fig.02-SNARE_70
TOM
fig.02-TOM_70
* PINSTRIPE is a registered trademark of Remo Inc., U.S.A.
HI-HAT
fig.02-HIHAT_70
* NORMAL: The gap between the top and bottom hi-hat is
controlled by the pedal.
FIXED: The gap is fixed.
Parameter Value
[F1 (SHELL)]
Shell Depth NORMAL, DEEP1–2
Beater Type FELT, WOOD, PLASTIC
[F2 (HEAD)]
Head Type CLEAR, COATED, PINSTRIPE
Head Tuning -480–+480
[F3 (MUFFLE)]
Muffling OFF, TAPE1–2, BLANKET, WEIGHT
Snare Buzz OFF, 1–8
[F4 (MIC)]
Mic Position OUTSIDE2–1, STANDARD,
INSIDE1–2
Parameter Value
[F1 (SHELL)]
Material WOOD, STEEL, BRASS
Shell Depth 1.0”–20.0”
[F2 (HEAD)]
Head Type CLEAR, COATED, PINSTRIPE
Head Tuning -480–+480
[F3 (MUFFLE)]
Muffling OFF, TAPE1–2, DOUGHNUTS1–2
Strainer Adj. OFF, LOOSE, MEDIUM, TIGHT
[F4 (MIC)]
Mic Position OUTSIDE2–1, STANDARD,
INSIDE1–2
Parameter Value
[F1 (SHELL)]
Shell Depth NORMAL, DEEP1–2
[F2 (HEAD)]
Head Type CLEAR, COATED, PINSTRIPE
Head Tuning -480–+480
[F3 (MUFFLE)]
Muffling OFF, TAPE1–2, FELT1–2
Snare Buzz OFF, 1–8
[F4 (MIC)]
Mic Position OUTSIDE2–1, STANDARD,
INSIDE1–2
Parameter Value
[F1 (SIZE)]
Size 1”–40”
[F2 (TAMB)]
Add Tambourine OFF, ON
[F3 (FIXED)]
Fixed Hi-Hat NORMAL, FIXED1–4
[F4 (MIC)]
Mic Position OUTSIDE2–1, STANDARD,
INSIDE1–2
TD-20_Ref_e.book 33 ページ ２００４年３月５日 金曜日 午後７時３分