34
Chapter 2. Drum Instrument Settings [INST]
CRASH/SPLASH/CHINA/RIDE
fig.02-CYM_70
Other Instruments
fig.02-005_70
You can edit the instruments of the head and rim
simultaneously. Pressing [F5 (H & R)], you can choose to
set the head and rim simultaneously or individually.
* When the instruments assigned to the head and rim are not in
the same Inst Group, you only can set the head and rim
individually even if [F5 (H & R)] is set to ON.
You can restore the settings for each instrument to the
standard values by pressing [F4 (DEFAULT)] - [F5
(EXECUTE)] in the “INST” screen.
For some instruments, raising or lowering the value
beyond a certain point may not produce further change.
• KICK/SNARE/TOM: “Head Tuning”
• CRASH/SPLASH/CHINA/RIDE: “Sustain”
• Other Instruments: “Pitch” and “Decay”
Some instruments have the parameters cannot be edited.
• SNARE: “Material” and “Strainer Adj.”
Parameter Value
[F1 (SIZE)]
Size 1”–40”
[F2 (SIZZLE)]
Sizzle Type OFF, RIVET, CHAIN
[F3 (SUSTAIN)]
Sustain -31–+31
[F4 (MIC)]
Mic Position OUTSIDE2–1, STANDARD,
INSIDE1–2
Parameter Value
Pitch -480–+480
Decay Time -31–+31
TD-20_Ref_e.book 34 ページ ２００４年３月５日 金曜日 午後７時３分
To Next Page
Loading...
