19
Recording
10.
Use the cursor buttons to select “OK,” and
press the [ENTER] button.
The song is saved on the SD card.
Recording on a Connected Computer
You can connect the TD-27 to your computer and record
28 channels of multi-track audio onto your DAW software
(commercially available), or record your performance as
MIDI data.
Reference
For details, refer to “Reference Manual” (PDF).
Installing the USB Driver
The USB driver is software that transfers data between the
TD-27 and your computer software.
In order to transmit and receive audio as USB AUDIO, you
must install the USB driver.
USB cable (commercially available)
MEMO
For details on downloading and installing the USB driver,
refer to the Roland website.
http://www.roland.com/support/
To Next Page
Loading...
