Roland V-Drums TD-27 - System Settings - Basic and SD Card; System Settings Overview; Formatting an SD Card

24
Various Settings (SYSTEM)
Basic Operation in SYSTEM
Settings that are common to the entire unit, such as functions related to backing up the TD-27’s settings and the power supply
settings, are called “system” settings.
1. Press the [SYSTEM] button.
The SYSTEM screen appears.
2. Use the cursor buttons to select the menu that you want to edit, and press [ENTER] button.
Menu Explanation Page
BLUETOOTH Makes Bluetooth settings. p. 13
SD CARD Initializes an SD card, or backs-up the TD-27’s settings to an SD card. p. 24, p. 25
TRIGGER
Adjusts the trigger settings so that the TD-27 can accurately process the
signal from the triggers. You can also adjust pad settings such as sensitivity
(SENSITIVITY).
&
“Reference Manual” (PDF)
OUTPUT Specify the output destination of the sounds.
USB AUDIO Make USB audio settings.
MIDI Make MIDI settings.
OPTION Make settings for the MIX IN jacks, and the display.
AUTO OFF
Species whether the power automatically turns o after a specied length
of time elapses.
p. 26
INFO Shows information about the TD-27 itself, such as its program version.
&
“Reference Manual” (PDF)
FACTORY
RESET
Return the TD-27 to its factory settings. p. 26
Reference
For details on each menu items, refer to “Reference Manual” (PDF).
3. As appropriate for the menu item that you selected, use the dial to edit the settings.
4. Press the [DRUM KIT] button to return to the DRUM KIT screen.
Formatting an SD Card
Here’s how to format an SD card.
* Before using an SD card for the rst time with the TD-27,
you must format the SD card.
NOTE
When you format an SD card, all data on the SD card is
erased.
1. Insert an SD card into the TD-27 (p. 7).
2. Press the [SYSTEM] button.
The SYSTEM screen appears.
3. Use the cursor buttons to select “SD CARD,”
and press [ENTER] button.
The SD CARD MENU screen appears.
4. Use the cursor buttons to select “FORMAT,” and
press [ENTER] button.
A conrmation message appears.
If you decide to cancel, select “CANCEL” and press the
[ENTER] button.
5. Use the cursor buttons to select “OK,” and
press the [ENTER] button.
The SD card will be formatted.