Roland V-Drums TD-27 - Importing and Playing User Samples; Supported Audio File Formats; Importing an Audio File; Selecting Import Destination

22
Editing a Drum Kit
Importing and Playing Audio Files (USER SAMPLE)
Audio les that you created on your computer can be imported from an SD card into the TD-27, and played as instruments
(User Sample function). You can edit the sound of a user sample or apply eects to it in the same way as other instruments.
Audio les that can be loaded by the TD-27
WAV le
Format (extension) WAV (.wav)
Sampling frequency 44.1 kHz
Bit rate 16, 24-bit
Length Maximum 180 seconds
* File names or folder names that contain more than 16 characters are not shown correctly. Files and folders using double-
byte characters are also not supported.
Importing an Audio File
Here’s how to import an audio le into the TD-27 as a user
sample.
1. Insert an SD card into the TD-27 (p. 7).
2. Press the [USER SAMPLE] button.
The USER SAMPLE screen appears.
3. Move the cursor to the “IMPORT,” and press the
[ENTER] button.
The USER SAMPLE IMPORT screen appears.
Cursor button Explanation
[
] button Moves cursor (up)
[
] button Moves cursor (down)
[
] button Exits a folder
[
] button Enters a folder
MEMO
You can press the [F5](PREVIEW) button to hear the
sound being imported.
4. Use the cursor buttons to select an audio le,
and press the [F1] (SELECT) button.
The USER SAMPLE IMPORT (DESTINATION) screen
appears.
5. Use the cursor buttons to select the import-
destination number, and press the [F5]
(IMPORT) button.
A conrmation message appears.
* If you select a number in which data already exists, the
message “User Sample Exists!” appears. Select a number
that contains no data.
6. Use the cursor buttons to select “OK,” and press
the [ENTER] button.
The audio le is imported.