Roland V-Drums TD-27 - Troubleshooting - Sound and Pad Issues; No Sound or Insufficient Volume; Pad Not Sounding; Trigger Input Response Issues

27
Trouble Items to check Action Page
Troubles with sound
No sound /
Insucient volume
Is the product correctly connected to the external
devices?
Check the connections. p. 6
Could the product’s volume be lowered?
Use the [PHONES] or [MASTER] knob to adjust the
volume.
–
Could the volume of the connected amplied
speaker be lowered?
Adjust the volume of the connected amplied
speakers.
–
Could the volume be lowered on the smartphone
etc. that’s connected to the MIX IN jack?
Make adjustments using the [BACKING] knob or on
your smartphone.
–
Could the MIDI “Local Control” be “OFF”? Set “Local Control” to “ON.”
&
PDF
A specic pad does
not sound
Are the cables correctly connected to each pad and
pedal?
Check the connections. p. 6
Could the Instrument be “OFF”? Assign an Instrument. p. 20
Could the Instrument’s “Volume” be lowered? Adjust the Instrument’s “Volume.” p. 20
Have the settings for “OUTPUT” been made correctly? Check the settings for “OUTPUT.”
&
PDF
Could user samples have been deleted?
If you delete the user sample that’s assigned to a pad,
it will not produce sound.
Either load the user sample once again, or assign a
dierent instrument.
p. 22
Is the pad’s “trigger type” set correctly? Set the pad’s “trigger type.”
&
PDF
Is the connection cable correctly connected to the
TRIGGER IN jack/TRIGGER INPUT jack or the DIGITAL
TRIGGER IN port ?
Check the connections. p. 6
No sound when
you strike a pad
assigned to a
TRIGGER IN jack or
TRIGGER INPUT jack
/ Trigger does not
respond
If a pad connected to a DIGITAL TRIGGER IN port
is assigned to the same trigger input as a pad
connected to a TRIGGER IN jack/TRIGGER INPUT
jack, the sound of the pad that’s connected to the
TRIGGER IN jack/TRIGGER INPUT jack is not output.
Disconnect the pad connection cable from the
DIGITAL TRIGGER IN port.
p. 7
No sound when
you strike a pad
connected to a
DIGITAL TRIGGER IN
port / Trigger does
not respond
Is the trigger input set correctly?
After connecting the pad, specify the trigger input
that it will play.
p. 7
Could you be using carbon or metal sticks?
Use wood or plastic sticks. Using carbon or metal
sticks might make the sensor malfunction.
–
Could you be using metal brushes?
Use nylon brushes. Using metal brushes might make
the sensor malfunction, or might scratch the pad.
–
Troubles with SD card
SD card is connected
but not recognized /
Data is not visible
Is the SD card formatted correctly? Format the SD card on this product. p. 24
Can’t play MP3/
WAV le
Does the product support the sampling frequency
and bit rate of the MP3 le, or the sampling
frequency and bit depth of the WAV le?
Use MP3/WAV les that the product supports. p. 14
Playback may be unable to keep up if you raise the
playback speed of a high bit-rate of MP3.
– –
Can’t correctly set
the A-B repeat times
When using a MP3 le, it might not be possible to
play back the A-B repeat region correctly.
Can’t play or import
an audio le
Is the audio le format correct?
Check the audio le format, le name, and le name
extension.
p. 14
p. 22
Is the audio le in the correct location? Check the location of the audio le. p. 14
Could a large number of audio les be in the folder?
Keep the number of audio les in a folder to 200 or
fewer.
–
Troubleshooting