Roland V-Drums TD-3 - Pad Playing Techniques; Head and Rim Shots

19
Playing the Drum Kit
When Playing the Snare
fig.Play-01.e
To play the sound assigned to the head, hit only the
head.
To play a rim shot, you must strike both the head and
the rim of the pad simultaneously .
Be sure the Snare pad is connected to the SNARE trigger input jack.
Certain instrument names, for example: “S1” as the snare head instrument and “S1r” as the
rim instrument are actually “matched” as it is the head and rim from the same drum.
( → Selecting Sounds [INST] (p. 24))
When Playing the Hi-Hat
fig.Play-04.e
Hitting the head is like playing the bow of the hi-hat and
hitting the rim is like playing the edge of the hi-hat cymbals.
When you select “H01” as the HI-HAT bow (head) instrument and “H02” as the edge (rim)
instrument (or “H03” for the bow and “H04” for the edge), you will notice they correspond
to the same hi-hat. ( → Selecting Sounds [INST] (p. 24))
Playing the Pads
Head and Rim Shots
Head Shot
Rim Shot
Head
Head
Rim
Bow Shot
Edge Shot
Head
Rim
TD-3_e.book 19 ページ ２００７年９月１８日 火曜日 午後２時４０分