26
Creating Your Own Drum Kit
Ambience
(15 types)
A choice of Ambience or “room simulation” effects are available for each kit on an individual basis.
The choices include different sized rooms or even a selection of “compressed” types.
1.
Press [AMBIENCE] to turn it on or off.
If [AMBIENCE] is lit: the ambience on
If [AMBIENCE] is unlit: the ambience off
Ambience On/Off settings can NOT be saved for individual drum kits.
If you want the Ambience on or off each time the power is turned on, press [DRUM KIT]
while the Ambience is on or when off.
The TD-3 provides 15 different pre-programmed Ambience settings. They are applied equally to all
sounds in the kit.
Ambience is also applied to the click (metronome) sound.
1.
Press [EDIT].
[EDIT] flashes.
2.
Press [EDIT] a few times until the AMBIENCE indicator is lit.
The ambience type number appears.
fig.01-006
Hold down [EDIT] and press [-] to have the indicators light in the reverse order of that when
only [EDIT] is pressed.
3.
Press [+] or [-] to select the ambience type.
4.
When you’re finished, press [DRUM KIT]; the [EDIT] light goes off.
Do not turn off the power without the [EDIT] light having gone out. Otherwise you will lose
the changes you have just made.
Ambience Settings [AMBIENCE]
Switching Ambience On/Off
Selecting the Ambience Type
Type
Description
n 1, n 2, n 3
Natural room reverberation.
As the number increases the
room size changes, making the
effect more obvious.
b 1, b 2, b 3 Light, airy reverberation.
d 1, d 2, d 3 Warm and mellow reverberation.
c 1, c 2, c 3 Boosted attack gives the sound greater punch.
Warm reverberation is also added.
C 1, C 2, C 3 Boosted attack gives the sound greater punch.
Shallow room reverberation is also added.
More compression is applied as
the number increases, giving
the sound greater “punch.”
TD-3_e.book 26 ページ ２００７年９月１８日 火曜日 午後２時４０分
To Next Page
Loading...
