17
Connecting External Equipment
You can connect external equipment as shown below. For information on specific connections, refer to the following pages.
* To prevent malfunction and/or damage to speakers or other devices, always turn down the volume, and turn off the power on all devices before
making any connections.
fig.peripheral-connection.eps
This unit is equipped with balanced (XLR/TRS) type jacks. Wiring diagrams for these jacks are shown below. Make connections
after first checking the wiring diagrams of other equipment you intend to connect.
fig.XLR-TRS.eps
Howling could be produced depending on the location of microphones relative to speakers. This can be remedied by:
1. Changing the orientation of the microphone(s).
2. Relocating microphone(s) at a greater distance from speakers.
3. Lowering volume levels.
To Next Page
Loading...
