Roland VS-1680 - Dividing Phrases (Phrase Split)

This deletes the phrase containing the mark. When [F2
(ALL)] is pressed, you can place or remove the marks
on all the tracks simultaneously.
fig.04-61(ph_del_del.eps)
5. Press [F4 (Exec)].
This executes Phrase Delete.
6. When the deletion is completed correctly,
“Complete” appears in the display.
7. Press [PLAY (DISPLAY)].
Return to Play condition.
Dividing Phrases (Phrase Split)
This operation allows you to divide phrase
into two parts for the time-wise. This is con-
venient when, for example, you want to select
a section of the performance data to copy as a “break
beats” (Phrase Loop).
fig.04-63(ph_sp.eps)
1. Hold down [SHIFT] and press [F2 (TRACK)].
2. Press [F1 (Tr/Ph)] so that Phrase Edit menu
appears in the display.
3. Press [F1 (Split)]. If “Split” does not appear in [F1],
first press [PAGE] until “Split” is displayed, and
then press [F1 (Split)].
4. Press [F1 (SelPh)].
5. Press the STATUS button for the track that con-
tains the phrase you want to split.
The button indicator lights red.
Alternatively, press [ ], [ ], [ ], and [ ] to
move the cursor to the phrase you want to split, and
then press [F3 (MARK)] or [YES].
This splits the phrase containing the mark. When [F2
(ALL)] is pressed, you can place or remove the marks
on all the phrases simultaneously.
fig.04-64(ph_sp_sel.eps)
6. Press [F1 (Back)].
7. Rotate the TIME/VALUE dial.
fig.04-65(ph_sp_prm.eps)
TO (To point)
Specifies the time for splitting the phrase.
8. Press [F4 (Exec)].
This executes Phrase Split.
9. When the split is completed correctly, “Complete”
appears in the display.
10. Press [PLAY (DISPLAY)].
Return to Play condition.
A
TO Time
A1 A2
Chapter 4 Editing a Recorded Performance (Track Editing)
100