Roland VS-1680 - When VS-880, VS-1680 and VS-880 EX Format Song Data Are Existed in a Disk

1. Connect the Zip drive to the VS-1680.
2. Select the song you want to convert for use VS-
880/VS-880EX as the current song.
3. Insert a ZIP disk into the Zip drive.
4. Press [PLAY (DISPLAY)].
5. Hold down [SHIFT] and press [F1 (SONG)].
6. Press [F5 (Exprt)]. If “Exprt” does not appear in
[F5], first press [PAGE] until “Exprt” is displayed,
and then press [F5 (Exprt)].
7. Press [ ], [ ], [ ], and [ ] to move the
cursor to “Save As.” Select the Song data format
to be converted to, VS-880 or VS-880EX, with
TIME/VALUE dial.
fig.10-09(export.eps)
8. Press [F4 (Exec)].
9. Press [YES].
“STORE Current?” (Store the current song?) appears
in the display.
10. If you wish to save the current song, press [YES];
if not, then press [NO]. Song Export procedure
will begin.
11. After Song Export is completed, return to Play
condition.
When VS-880, VS-1680 and
VS-880EX Format Song Data
are Existed in a Disk
If you recover the Song with Archive Extract or CD-R
Recover, Song data with VS-880, VS-1680 and VS-
880EX format may be created in a disk. In this case,
Song numbers are sorted by Song data format as fol-
lows.
VS-880: 1–200
VS-1680: 1–200
VS-880EX: 1–200
But maximum song number which can be existed
in a partition is 505. For example, maximum number
of VS-880EX songs which can be saved is 105, if each
200 of VS-1680 Songs and VS-880 Songs have already
be existing in the Partition 1 of the internal hard disk.
In the Song Select display, type of Song data is shown
by icon.
: for VS-1680
: for VS-880
: for VS-880EX
Chapter 10 Compatibility
153
Chapter 10