Protecting Performances
1. Make the current song the one to which you want
to apply Song Protect.
2. Hold down [SHIFT] and press [F1 (SONG)].
The Song menu icon appears in the display.
3. Press [F4 (PROTC)]. If “PROTC” does not appear
in [F4], first press [PAGE] until “PROTC” is dis-
played, and then press [F4(PROTC)].
4. ”Song Protect Off → On, Execute?” appears in the
display. Press [F4 (Exec)].
5. A confirmation message appears in the display.
Press [YES].
6. ”STORE Current?” (Store the current song?)
appears in the display. If you wish to have Song
Protect applied to the song after it is saved, press
[YES]; if not, then press [NO].
7. After the Protect is applied, “--- Complete ---”
appears in the display. Press [PLAY (DISPLAY)].
Return to Play condition.
To Remove Song Protect
1. Select the song from which you currently want to
remove the protect function.
2. Hold down [SHIFT] and press [F1 (SONG)].
The Song menu icon appears in the display.
3. Press [F4 (PROTC)]. If “PROTC” does not appear
in [F4], first press [PAGE] until “PROTC” is dis-
played, and then press [F4 (PROTC)].
4. The message “Song Protect On → Off, Execute?”
appears in the display. Press [F4 (Exec)].
5. A confirmation message appears in the display.
Press [YES].
6. When the protect function is removed,
“--- Complete ---” appears in the display. Press
[PLAY (DISPLAY)].
Return to Play condition.
Chapter 3 Multi-Track Recording
82
To Next Page
Loading...
