* Depending on the effects used, when mixing with different effects inserted into each
channel, or mixing channels having effects inserted with other channels having no
effects, timing shifts may occur, or you may not be able to achieve the effect you desire.
Inserting with Input and Track Channels
1. Select the channels to which the effect is to be applied. Press the SELECT
buttons for the input or track channels to which you want to apply the
effect.
The button indicators light, and the Input Mixer or Track Mixer screen appears
in the display.
2. Press [F1 (Ef1In)]. If “Ef1In” does not appear in [F1], first press [PAGE] until
“Ef1In” is displayed, then press [F1 (Ef1In)]. Alternatively, use [ ], [ ],
[ ], and [ ] to move the cursor to “EFXIns.”
3. Press [YES].
4. Use [ ], [ ], [ ], and [ ] to move the cursor. Rotate the
TIME/VALUE dial.
fig.05-04(eff1.eps)
To Next Page
Loading...
