This trims the performance data on the phrase con-
taining the mark. When [F2 (ALL)] is pressed, you can
place or remove the marks on all the phrases simulta-
neously.
fig.04-57(trim_o_sel.eps)
6. Press [F1 (Back)].
7. Rotate the TIME/VALUE dial.
fig.04-58(trim_i_prm.eps)
TO (To point)
Specifies the time for Trim Out.
8. Press [F4 (Exec)].
This executes Trim Out.
9. When the trim is completed correctly, “Complete”
appears in the display.
10. Press [PLAY (DISPLAY)].
Return to Play condition.
Deleting Phrases (Phrase Delete)
This operation deletes specified phrases.
When this operation is used to, existing play-
back data after a deleted phrase is not moved
forward.
fig.04-60(ph_del.eps)
When you apply Phrase Delete to phrase 2 while
phrase 2 is punched in to phrase 1, the part of phrase 1
obscured by phrase 2 becomes audible.
fig.04-60a(ph_del_punch.eps)
* While it may seem that the performance data has disap-
peared, the data itself is not deleted from the hard disk.
Thus, even when you carry out the Phrase Delete proce-
dure, the free disk space shown in the display does not
change.
1. Hold down [SHIFT] and press [F2 (TRACK)].
2. Press [F1 (Tr/Ph)] so that Phrase Edit menu
appears in the display.
3. Press [F6 (Del)]. If “Del” does not appear in [F6],
first press [PAGE] until “Del” is displayed, and
then press [F6 (Del)].
4. Press the STATUS button for the track that con-
tains the phrase you want to delete.
The button indicator lights red.
Alternatively, press [ ], [ ], [ ], and [ ] to
move the cursor to the phrase you want to delete, and
then press [F3 (MARK)] or [YES].
To Next Page
Loading...
