Roland VS-1680 - VS8 F-2 Effect Expansion Board; VS8 F-2 Specifications; Installing the VS8 F-2

Track Mixer
Track mixer is placed after the recorder section, and correspond to the tracks
(1–15/16).
fig.01-11(trackmix.eps)
All of the tracks are output from the MASTER jacks. Additionally, tracks can
also be routed back to the RECORDING bus for overdubbing, or re-rerecording.
In this status, the channel faders 1–15/16 correspond respectively to Tracks
1–15/16.
Switching the Fader Functions
On the VS-1680, it is able to adjust Input mixer or Track mixer by switching the
function of the channel faders on the top panel. Pressing [FADER] on the top
panel toggles between the input mixer and the track mixer. The button indicator
indicates which mixer is currently selected.
fig.01-12(fader.eps)
Balance
9/10
EQ1 Fader1
EQ2 Fader2
Pan1
Pan2
EQ3 Fader3
EQ4 Fader4
Pan3
Pan4
EQ5 Fader5
EQ6 Fader6
Pan5
Pan6
EQ7 Fader7
EQ8 Fader8
Pan7
Pan8
EQ
9/10
Fader
9/10
Balance
11/12
EQ
11/12
Fader
11/12
Balance
13/14
EQ
13/14
Fader
13/14
Balance
15/16
EQ
15/16
Track1
Track2
Track3
Track4
Track5
Track6
Track7
Track8
Track
9/10
Track
11/12
Track
13/14
Track
15/16
Fader
15/16
REC 1 (Recorder)
REC 2 (Recorder)
REC 3 (Recorder)
REC 4 (Recorder)
REC 5 (Recorder)
REC 6 (Recorder)
REC 7 (Recorder)
REC 8 (Recorder)
MIX L/R (MASTER)
Recorder Track Mixer (Track channel 1–15/16)
REC 1
REC 2
REC 3
REC 4
REC 5
REC 6
REC 7
REC 8
dark
lit (track mixer is currently selected)
Chapter 1 Before You Start (VS-1680 Terminology)
26