Naming Phrases (Phrase Name)
With each recording of the tracks, the follow-
ing names (Phrase names) are given automat-
ically.
fig.04-70(ph_name.eps)
You can freely change phrase names. When, for exam-
ple, you record something over many times, keeping
track of what performance is recorded in each phrase
can become difficult. In such instances, we recom-
mend giving phrases unique names (such as “riff” or
“solo”) to make all these phrases more manageable.
1. Hold down [SHIFT] and press [F2 (TRACK)].
2. Press [F1 (Tr/Ph)] so that Phrase Edit menu
appears in the display.
3. Press [F4 (Name)]. If “Name” does not appear in
[F4], first press [PAGE] until “Name” is dis-
played, and then press [F4 (Name)].
4. Press [ ], [ ], [ ], and [ ] to move the
cursor to the phrase you want to rename, and
then press [F1 (Name)] or [YES].
5. The Phrase Name screen appears in the display.
Using [ ], [ ], [ ], and [ ] and the
TIME/VALUE dial, enter the name of the phrase.
At this time, the function buttons work as shown
below.
fig.04-71(ph_name_ascii.eps)
[F1 (Hist)]: Pressing this button takes you through
a register of the last 20 phrase names
entered, one at a time.
[F2 (Clr)]: Clears all characters in the window.
[F3 (Del)]: Deletes the character where the cursor
is positioned.
[F4 (Ins)]: Inserts a space where the cursor is posi-
tioned.
[F5 (Write)]: Accepts/Confirms the phrase name
and removes the screen.
[F6 (EXIT)]: Exits the screen without accepting the
phrase name.
6. After entering the name, press [F5 (Write)].
7. Hold down [SHIFT] and press [STORE (ZERO)].
“STORE OK?” appears in the display.
8. Press [YES].
This saves the song with its name.
9. Press [PLAY (DISPLAY)].
Return to Play condition.
To Next Page
Loading...
