EasyManua.ls Logo

Roland VS-1680 - Switching Effects; Adjusting Effects

Roland VS-1680
212 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Switching Effects
You can use MIDI control change messages transmit-
ted from an external MIDI controller to switch effects.
1. Press [PLAY (DISPLAY)].
2. Hold down [SHIFT] and press [F5 (SYSTEM)].
The System menu icon appears in the display. If the
System menu icon does not appear, then press [F6
(EXIT)].
3. Press [F4 (MIDI)]. If “MIDI” does not appear in
[F4], first press [PAGE] until “MIDI” is displayed,
then press [F4 (MIDI)].
4. Press [ ], [ ], [ ], and [ ] to move the
cursor to “P.C.Eff” and rotate the TIME/VALUE
dial.
P.C.Eff (Program Change Effect)
With this set to “On,” the effect is switched when pro-
gram change messages are received. For now, select
“On.”
5. Press [PLAY (DISPLAY)].
Return to Play condition.
MIDI channels 1–4 correspond to EFX1–EFX4 respec-
tively. The relationship between the bank number
received by the VS-1680 and the Effect Patch Number
it switches to is shown below.
Bank No.MSB Bank No.LSB Program No.Patch No.
001–100 P000–P099
011–100 P100–P199
021–10 P200–P209
031–100 U000–U099
041–100 U100–U199
* For more detailed information, please refer to “MIDI
Implementation” (Appendices p. 25).
Adjusting Effects
You can use MIDI control change messages transmit-
ted from an external MIDI controller to control effects.
1. Press [PLAY (DISPLAY)].
2. Hold down [SHIFT] and press [F5 (SYSTEM)].
The System menu icon appears in the display. If the
System menu icon does not appear, then press [F6
(EXIT)].
3. Press [F4 (MIDI)]. If “MIDI” does not appear in
[F4], first press [PAGE] until “MIDI” is displayed,
then press [F4 (MIDI)].
4. Press [ ], [ ], [ ], and [ ] to move the
cursor to “C.C.Eff” and rotate the TIME/VALUE
dial.
C.C.Eff (Control Change Effect)
With this set to “On,” the effect is adjusted when con-
trol change messages are received. For now, select
“On.”
5. Press [PLAY (DISPLAY)].
Return to Play condition.
* If you wish to use control change messages to switch
effects, use NRPN (Non Registered Parameter Numbers).
For more detailed information, please refer to “MIDI
Implementation” (Appendices p. 25).
Chapter 8 Use with MIDI Devices
139
Chapter 8

Table of Contents

Other manuals for Roland VS-1680

Related product manuals