14. Determine how the output is to be sent. Press [ ], [ ], [ ], and [ ]
to move the cursor. Rotate the TIME/VALUE dial to adjust each of the val-
ues.
fig.02-36(bou_step6.eps)
15. Press [F4 (Exec)].
A confirmation message appears in the display. Press [YES] if you want to set
the selected routing.
fig.02-24a(apply.eps)
16. Press [F3 (SAVE)].
The Routing Save screen appears in the display. Save the routing using the pro-
cedure described in Steps 5–8 of “Storing Routings as a Single List (Template)”
(p. 41).
Recalling EZ Routing
1. Press [EZ ROUTING].
The EZ Routing icon appears in the display.
2. Press [ ], [ ], [ ], and [ ]] or rotate the TIME/VALUE dial to
move the cursor to the routing you want to use.
3. Press [F4 (Exec)]. If “Exec” does not appear in [F4], first press [PAGE] until
“Exec” is displayed, and then press [F4 (Exec)].
fig.02-18(ez_con(rec).eps)
To Next Page
Loading...
