Roland XC-540 Setup Guide

Thank you very much for purchasing this product.
○ To ensure correct and safe usage with a full understanding of this product's performance, please be sure to read through
this manual completely and store it in a safe location.
○ Unauthorized copying or transferal of this manual, in whole or in part, is prohibited.
○ The contents of this document and the specications of this product are subject to change without notice.
○ The documentation and the product have been prepared and tested as much as possible. If you nd any misprint or
error, please inform us.
○ Roland DG Corp. assumes no responsibility for any direct or indirect loss or damage which may occur through use of
this product, regardless of any failure to perform on the part of this product.
○ Roland DG Corp. assumes no responsibility for any direct or indirect loss or damage which may occur with respect to
any article made using this product.

Roland XC-540 Specifications

General

Maximum Resolution	1440 dpi
Print Technology	Piezo inkjet
Ink Type	ECO-SOL MAX
Ink Colors	CMYK
Media Thickness	Maximum 1.0 mm with liner
Media Handling	Roll feed
Interface	Ethernet (10BASE-T/100BASE-TX)
Power Requirements	AC 100 to 240 V ± 10%, 50/60 Hz
Media Width	1378 mm (54.25 inches)