Step 5: Remove the Packing Materials
Packing materials are attached to the machine to protect it from vibration during transportation. When instal-
lation is complete, remove them.
WARNING
Perform this task with all power switches left switched off.
Otherwise sudden movement of the machine may cause injury.
○ Remove all packing materials. Any that remain may cause faulty operation or breakdown when the
power is switched on.
○ Store the packing materials carefully, because they are needed again when transporting the machine
for relocation or the like.
Packing material
Peel off the tape.
Peel off the tape.
Remove
To Next Page
Loading...
