Roland XC-540 - 7 Installing the Blade

7. Installing the Blade
CAUTION
Be sure to perform operations as specied by these instructions, and
never touch any area not specied in the instructions.
Sudden movement of the machine may cause injury.
CAUTION
Never touch the tip of the blade with your ngers.
Doing so may result in injury, and the cutting performance of the blade will be
impaired.
1. Insert a blade into the blade holder.
2. Enter the blade replacement mode.

Press .
Press several times.
v
Press .
Press .
w
Press .
Press twice.
x
Press .
The cutting carriage moves to a location permitting blade replace-
ment, and then the screen shown in the gure appears.
y
Open the front cover.
Preparations are complete, when this screen appears.
MENU
SUB MENU
SUB MENU
MAINTENANCE
MAINTENANCE
REPLACE KNIFE
NOW PROCESSING..
FINISHED?
OPEN FRONT
COVER
Blade
Insert the blade.
Blade holder
Pin
Cap
Insert the pin.
Insert the pin to the position where its end sticks
out about 3 to 5 millimeters.
Insert the blade.
45