Step 2: Make the Network Settings on the Printer
Important
The addresses used in this section are merely example settings. For detailed information about the
settings, consult your network administrator.
1.
Set the IP address.
Press .
Press several times.
v
Press .
Press .
w
Press three times.
[IP ADDRESS]: 192.168.000.XXX
Note: Here, "XXX" may be any number you want from 2 to 254. How-
ever, be sure to specify a number that does not duplicate the setting
you made in Step 1. Here, "192.168.000.003" is entered by way of
example. Make the portion that corresponds to "192.168.000" the
same as the setting on the computer.
x
Use to select the address number.
y
Press .
z
Repeat
x
and
y
to set all the address numbers.
When you've nished making the setting, press .
Press .
The screen shown in the gure appears.
2.
Set the subnet mask.
Press .
v
Press twice.
To Next Page
Loading...
