Roland XC-540 - 3 Assembling and Installing; Step 1: Assemble the Stand

3. Assembling and Installing
Step 1: Assemble the Stand
WARNING
Perform this task with all power switches left switched off.
Otherwise sudden movement of the machine may cause injury.
CAUTION
Unpacking and installation must be carried out by six or more persons.
Otherwise the machine or the stand may fall, resulting in injury.
1. Attach the stand legs to the stay.

Place the stay on the accessories box.
v
Attach the left and right stand legs to the stay.
Loosely tighten the locations shown in the gure.
Stay
Stand leg (left)
Stay
Accessories box
Stay
Use this box.
3 places
3 places
Stand leg (right)
Hexagonal
wrench
Bolt
Hexagonal
wrench
Bolt
22