Roland XC-540 - 2-4 Starting Output Procedures

2. Clean the print heads with the SOL INK cleaning cartridges.

Use to select the ink type.
Press .
v
Make sure the drain bottle is installed.
Press .
w
Insert cleaning cartridges into slots 2, 3, 8, and 9.
x
 Pull out the cleaning cartridges.
 Insert the cleaning cartridges YOU PULLED OUT into
slots 1, 6, 7, and 12.
y
 Pull out the cleaning cartridges.
 Insert the cleaning cartridges YOU PULLED OUT into
slots 4, 5, 10, and 11.
SELECT INK TYPE
E-SOL Max LcLm
INSTALL
DRAIN BOTTLE
SET SOL-CL LIQUID
2 3 8 9
FILLING INK...
>>
REMOVE SOL CL
2 3 8 9
REMOVE SOL CL
1 6 7 12
SET SOL-CL LIQUID
4 5 10 11
FILLING INK...
>>>>>>
SET SOL-CL LIQUID
1 6 7 12
FILLING INK...
>>>>
37
5. XC-540 : Installing the Ink Cartridges