rollease acmeda AUTOMATE AX30 - 7 ADD CONTROLLER AND CHANNEL; 7.1 Using P2 Button on existing controller to add a new controller or channel; 7.2 Using a pre-existing controller to add or delete a controller or channel

24 | Automate
™
Programming Instructions | AX30/AX50 External Shade Motor ROLLEASE ACMEDA
A = Existing controller or channel (to keep)
B = Controller or channel to add or remove
A = Existing controller or channel (to keep)
B = Controller or channel to add or remove
Press P2 on
controller A.
Press P2 on
controller A.
Press P2 on
controller A.
Press P2 on
controller A.
Press P2 on the
controller B to remove
it.
Press STOP on an new
controller to add it.
Motor Response
Motor Response
Motor Response
Motor Response
Motor Response
Motor Response
7 ADD CONTROLLER AND CHANNEL
Consult user manual for your controller or sensor
Consult user manual for your controller or sensor
IMPORTANT
IMPORTANT
7.1
Using P2 Button on existing controller to add a new controller or channel
7.2
Using a pre-existing controller to add or delete a controller or channel