rollease acmeda AUTOMATE AX30 User Manual

26 | Automate
™
Programming Instructions | AX30/AX50 External Shade Motor ROLLEASE ACMEDA
Hold P1 button on motor head.
Press and release P1 button on
the motor head
9 SLEEP MODE
Enter Sleep Mode
Sleep mode is utilized to
prevent a motor from incorrect
configuration during other
motor setup.
If multiple motors are grouped on a single channel, Sleep Mode may be used to put all but 1 motor to sleep,
allowing programming of just the one motor that remains “Awake”.
Exit Sleep Mode: Method 1
Exit sleep mode once the shade
is ready.
Exit Sleep Mode: Method 2
Remove power and then
re-power the motor.
Motor Response
9 SLEEP MODE
10 WIND SENSOR FUNCTION
Approx.
Once the motor receives a command from the wind sensor the motor will respond accordingly. At this point
the motor will ignore any other remote or sensor commands for 8 minutes. This function is needed to avoid
contradicting multiple triggers. Keep this in mind when testing the motor with the remote after the wind
sensor has been triggered. The wind sensor function is ON by default.
Note: Motor will jog to alert user if operated within the 8 minutes.
10.1 Wind Sensor Prioritize Function

rollease acmeda AUTOMATE AX30 Specifications

General

Brand	rollease acmeda
Model	AUTOMATE AX30
Category	Engine
Language	English