rollease acmeda AUTOMATE AX30 User Manual

8 | Automate
™
Programming Instructions | AX30/AX50 External Shade Motor ROLLEASE ACMEDA
3 P1 BUTTON FUNCTIONS
This table describes the function of a short P1 Button press/release (<2 seconds) depending on current motor
configuration.
The P1 Button is utilized to administer motor configurations as described below.
Activate Pairing Mode
Approx.
Approx.
Approx.
Sleep Mode
Reverse Direction
Approx.
Reset To Factory Settings
Approx.
Approx.
P1
Press
Condition
Function
Achieved
Visual
Feedback
Audible
Feedback
Function Described
Short
Press
If limit is NOT set None No Action None No Action
If limits are set
Operational
control of motor,
run to limit. Stop
if running
Motor Runs None
Operational control
of motor after pairing
and limit setting is
completed first time
If motor is in
“Sleep Mode” &
limits are set
Wake and control
Motor wakes
and runs in a
direction
None
Motor is restored from
Sleep Mode and RF
control is active
Hold P1 button on motor head.
Approx.
Approx.
Approx.
Approx.
3.1 Motor state test
3.2
Motor configuration options
8
P1 button on motor head

rollease acmeda AUTOMATE AX30 Specifications

General

Brand	rollease acmeda
Model	AUTOMATE AX30
Category	Engine
Language	English