4. Maintenance
DANGER
Risk of accident due to overdue maintenance and service!
When neglecting servicing and maintenance, worn or damaged components may cause accidents.
• The maintenance and inspection works and intervals mentioned in this manual must be observed.
• Also note the maintenance intervals of the installed components.
• Compliance with the maintenance and inspection activities and intervals is a prerequisite for maintaining the warranty
claims.
• If the frame or a component is damaged, it must no longer be used.
Regular maintenance and care is the only way to ensure that all parts of the bike function perfectly. The required
maintenance and inspection activities must be carried out by a person with the necessary qualifications.
COMPONENTS TASK INTERVAL
Frame Check the torques of the bolt connections.
„6. Anzugsdrehmomente“ auf Seite <?>For torque values, see .
for the first time after 100 km
then every 200 km
Visually inspect the frame for damage such as cracks or
deformation.
If in doubt, please consult the ROSE service team or a qualified
bicycle mechanic!
If damage is discovered, the frame may no longer be used. Contact
ROSE Service immediately!
after every ride
and after a crash
Headset Disassemble the headset, clean, lubricate and re-assemble it.
Replace bearings that don’t run smoothly or that show signs of
corrosion.
annually or after 200 hours
of use
Seat post Disassemble the seat post, clean the seat post and the frame’s
seat tube.
Coat the seat post with assembly paste before mounting it.
after 3 months or 60 hours
of use
Components The maintenance activities and intervals for the components must also be carried out in accordance
with the respective manufacturer's instructions!
To Next Page
Loading...