Rosslare AC-215 - Wiring; Inputs Wiring; Outputs Wiring

AC-215 Single and Double Door Access Control Unit
Hardware Installation Guide
18
Power Supply
The following diagram illustrates wiring between the PS-14 power supply and the AC-215. It is
recommended to add a 12VDC lead acid backup battery to backup power if the main fails.
If the main output is 12VDC wire it to the (PS-14), otherwise support your power supply
according to output requirements.
For further information refer to the Output requirements page 6.
~
VEN
~
16VAC
+VBAT (+)
12UDC
(-)
1.5A
(-)12UDC
Tamper (-)
+
12VDC
(-)
0.5A
230/16
VAC
Back up
Battery
IN 1
+
-