Programming
36 AC-F/G4x Series Installation and Programming Manual
Changing the Auxiliary Code
The Auxiliary code is mainly used as a method to quickly test the
Auxiliary relay during installation.
For security reasons, when the first user is added to the
controller or the open code is changed, the default auxiliary
code is automatically deleted; non-default codes are not be
erased automatically.
Auxiliary code does not function in Secure mode.
Auxiliary code only works when the Auxiliary mode is 0, 1, 8 or 9.
Wrong entries return the controller to Normal mode.
Code 0000 erases and deactivates the auxiliary code.
The default 4-digit factory setting for the auxiliary code is 0852.
To change the Auxiliary code:
Enter Programming mode.
Press 2 to enter Menu 2.
The left LED turns orange.
Enter the new 4-digit Auxiliary code.
You hear three beeps.
The system returns to Normal mode.
To Next Page
Loading...
Need help?
General
