Programming
AC-F/G4x Series Installation and Programming Manual 39
Press 5 to enter Menu 5.
The left LED flashes orange.
There are four different ways to program the Normal/Bypass
code and door chime:
Disable both Bypass code and the door
chime. Enter the code 0000.
Disable Bypass code and enable the door
chime. Enter the code 0001.
Enable Bypass code and disable the door
chime. Enter any code ending with 0.
Enable Bypass code and enable the door
chime. Enter a code not ending with 0.
You hear three beeps.
The system returns to Normal mode.
To Next Page
Loading...
Need help?
General
