Rosslare AYC-F/Gx4 Series Installation And Programming Manual

Controller Operation
AYC-F/Gx4 Series Installation and Programming Manual 49
The left LED flashes green.
3. Construct a code using the following
instructions:
 Second digit
Set the number of wrong code attempts, which causes a
Lockout between 0 and 9 attempts.
 Third and fourth digits
Sets the Duration of the lockout, between 00 and 99; the
value is multiplied by ten, resulting in 0 to 990 seconds.
5.9.11 Enrolling Primary and Secondary Codes
5.9.11.1 Primary Codes
 Primary codes can only be enrolled to an empty user slot,
meaning a slot where there is no existing Primary code.
 Primary codes must be unique, meaning one user’s Primary code
may not be the same as other user’s Primary code.
 Primary codes cannot be the same as any system codes, such as
the Normal/Secure code or Lock Strike code.
 Users who hold a Primary code can gain entry only during Normal
mode.
5.9.11.2 Secondary Codes
 Secondary codes can only be enrolled to a user slot that already
has a Primary code enrolled but has no Secondary code.
 Secondary codes do not have to be unique, meaning multiple
users can all hold the same Secondary code.
 Secondary codes cannot be the same as any system codes, such
as the Normal/Secure or Lock Strike codes.
 Users who hold Secondary codes can gain entry in any mode of
operation.
Green
Green

Rosslare AYC-F/Gx4 Series Specifications

General

Brand	Rosslare
Model	AYC-F/Gx4 Series
Category	Controller
Language	English