Rotary 100 Series - Inspection of Safety and Structural Components; 6. Emergency Shutdown & Drainage Checks; 7. Signalling Device Checks; 8. Stable Installation Device Checks

10. Load suspension devices
Protection against sliding
Roll-off protection
Holding device
Protection of the hinged bracket
Condition
Function
Safety fence Condition
Corrosion
Fastening and securing of removable parts
Effectiveness of locking mechanisms
Mobility of movable parts
Ground Surefootedness
Deformation
Corrosion
Fastening and securing of removable parts
Parallel motion on operating platforms Condition
Function
Wear
Cracks
Corrosion
Stowable operating platform Condition and effectiveness of the locking
mechanism
Stairs Surefootedness
Deformation
Corrosion
Damage
Fastening and securing of removable parts
Welded connections
11. Steel wire rope Cable connections Wear
Corrosion
Wire breakages
Wire break nests
Pinch points
Loosening of the outer layer
Bird-caging
Sheaves and pulleys Cracks
Signs of wear
Burr formation in the groove
Correct aligning of the groove
Rope winding
Clamping device
Securing at rope bearings
Protection against coming off of the rope
Condition
Function
12. Steel link chains, chain linkings Mobility
Wear
Cracks
Securing of the studs, e.g. by rivet head, ring