Rotary 1000 SERIES User Manual

3
•Alwayskeep area around lift clean of tools, debris, grease, and
oil.
•Always keep runway clean.
•Replace all caution, warning, or safety related decals on the lift
when unable to read or missing.
•ForWheelsFreeDeviceSafetyInstructions see Wheels Free
Device Installation, Operation and Maintenance Instructions in
the wheels free device box.
•Neveruse work step while lift is in a raised position.
•DONOT perform any maintenance on the power unit, control
valves, air or fluid lines, hydraulic cylinders, or check fluid level
until lift has been fully lowered and all pressure has bee released
from system. Follow OSHA Lockout/Tagout procedures as they
apply, reference ANSI Z244.1.
Do not operate
a damaged lift.
©
SAFETY
INSTRUCTIONS
WARNING
Remain clear of lift
when raising or
lowering vehicle.
©
Proper maintenance
and inspection
is necessary
for safe operation. ©
SAFETY
INSTRUCTIONS
WARNING
Keep clear
of pinch points
when lift is moving.
©
WARNING
Clear area if vehicle
is in danger of falling.
©
Keep feet
clear of lift
while lowering.
©
WARNING
Read operating
before using lift.
©
SAFETY
INSTRUCTIONS
and safety manuals
WARNING
Chock wheel
to prevent
vehicle movement.
©
CAUTION
Lift to be used
by trained operator
ONLY.
©
?
?
?
WARNING
Do not override
self-closing
lift controls.
©
CAUTION
Authorized personnel
only in lift area.
©
SAFETY INSTRUCTIONS
•DONOT block open or override self-closing lift controls, they are
designed to return to the off or neutral position when released.
•Cleanarea if vehicle is in danger of falling.
•Remove tools, and other equipment from on or below lift before
lowering lift.
CAUTION
Lowering lift legs onto an obstruction may cause
damage to lift.

Rotary 1000 SERIES Specifications

General

Brand	Rotary
Model	1000 SERIES
Category	Lifting Systems
Language	English