2
• TheOwner/Employershall ensure that lift operators are qualified and that they are trained in the safe use and operation of the lift
using the manufacturer’s operating instructions; ALI/SM 93-1, ALI Lifting it Right safety manual; ALI/ST-90 ALI Safety Tips card;
ANSI/ALI ALOIM-2008, American National Standard for Automotive Lifts-Safety Requirements for Operation, Inspection and Mainte-
nance; ALI/WL Series, ALI Uniform Warning Label Decals/Placards; and in the case of frame engaging lifts, ALI/LP-GUIDE, Vehicle
Lifting Points/Quick Reference Guide for Frame Engaging Lifts.
• TheOwner/Employershall establish procedures to periodically inspect the lift in accordance with the lift manufacturer’s instruc-
tions or ANSI/ALI ALOIM-2008, American National Standard for Automotive Lifts-Safety Requirements for Operation, Inspection and
Maintenance; and The Employer Shall ensure that lift inspectors are qualified and that they are adequately trained in the inspection
of the lift.
• TheOwner/Employershall establish procedures to periodically maintain the lift in accordance with the lift manufacturer’s instruc-
tions or ANSI/ALI ALOIM-2008, American National Standard for Automotive Lifts-Safety Requirements for Operation, Inspection and
Maintenance; and The Employer Shall ensure that lift maintenance personnel are qualified and that they are adequately trained in
the maintenance of the lift.
• TheOwner/Employershall maintain the periodic inspection and maintenance records recommended by the manufacturer or ANSI/
ALI ALOIM-2008, American National Standard for Automotive Lifts-Safety Requirements for Operation, Inspection and Maintenance.
• TheOwner/Employershall display the lift manufacturer’s operating instructions; ALI/SM 93-1, ALI Lifting it Right safety manual; ALI/
ST-90 ALI Safety Tips card; ANSI/ALI ALOIM-2008, American National Standard for Automotive Lifts-Safety Requirements for Opera-
tion, Inspection and Maintenance; and in the case of frame engaging lifts, ALI/LP-GUIDE, Vehicle Lifting Points/Quick Reference
Guide for Frame Engaging Lifts; in a conspicuous location in the lift area convenient to the operator.
• TheOwner/Employershall provide necessary lockout/tagout means for energy sources per ANSI Z244.1-1982 (R1993), Safety Re-
quirements for the Lockout/Tagout of Energy Sources, before beginning any lift repairs.
• TheOwner/Employershallnot modify the lift in any manner without the prior written consent of the manufacturer.
TheOwner/Employer:
SAFETY INSTRUCTIONS
•Daily inspect your lift. Never operate if it malfunctions or if it
has been broken or damaged parts. Use only qualified lift service
personnel and genuine Rotary parts to make repairs.
•Thoroughly train all employees in the use and care of lift and
wheels free device, using manufacturer’s instructions and “Lifting
It Right” and “Safety Instructions” supplied with the lift.
•DONOT permit employees or customers on lift when it is either
being raised or lowered.
•Neverallow unauthorized or untrained persons to operate lift or
wheels free device.
•Prohibit customers or non-authorized persons from being in
shop area while lift is in use.
•DONOTstand in front or behind lift while vehicle is being driven
onto or backed off the lift.
•Loadvehicle on lift carefully, align vehicle with runways before
driving on.
•DONOT allow rear tires or portion of vehicle to interfere with
ramp/chocks.
•Never allow front wheels to strike the front wheel stops.
•Never raise or lower the lift while the vehicle is supported by the
wheels free device. Only raise or lower the lift when all 4 tires of
the vehicle are supported by the runway.
•Always stand clear of lift when raising or lowering and observe
“Pinch Points” Warning.
•Never overload lift: capacity of lift is 12,000 lbs. (6,000 lbs. per
axle.) CAPACITY SHOULD NOT BE EXCEEDED.
•Always engage parking brake and use the rear wheel chocks to
keep the vehicle from rolling freely on the runways.
•Always lower lift on locks before working on vehicle.
CAUTION
If you are working under vehicle, lift should be
raised high enough for locking latches to engage.