Royal 210DX - Double Receipts; Double Receipt Setting; To Issue Double Receipts

22
DOUBLE RECEIPTS
DOUBLE RECEIPT SETTING
( 12 ) - ( Status ) - [ Void ]
1 Digit
Status : 0 = Double receipt enable (Default Value = 0)
1 = Double receipt disable
Example: ( 12 ) - ( 1 ) - [ Void ]
VOID/CORR 1.21
TO ISSUE DOUBLE RECEIPTS
Pressing [ Amt Tend/TOTAL ] key re-prints the receipt.
Data to be accumulated in RAM to enable this feature is 60 lines. In the event that data exceeds 60 lines, only total amount is
to be printed.
{ TRANSACTION }
{ TENDER }
[ Amt Tend/TOTAL ] --> Print receipt
Example: REG-1 Mode :
( 100 ) - [ DEPT 1 ]
( 1 ) - [ PLU ]
[ Amt Tend/TOTAL ]
[ Amt Tend/TOTAL ] --> Re-prints receipt
Example: REG-2 Mode :
( 100 ) - [ DEPT 1 ]
( 1 ) - [ PLU ]
[ Amt Tend/TOTAL ]
[ Amt Tend/TOTAL ] --> Prints first receipt