Royal 583cx - Setting the Mode Message; Setting the Sales Message Start and Stop Times

Chapter 5: Setting Up Your Cash Register - Advanced
44 Alpha 583cx User’s Guide
Setting the Mode Message
To program the Mode message time setting
1 Put the PRG key in the Mode key slot and turn it to the PRG position.
2 If you are prompted for a Manager Password, type the password number
and then press the Check key. If you did not program a Manager
Password, go to the next step.
3 Using the round Number keys, press 2, press the number of seconds you
want to delay as 2 digits, and press the Charge key.
Setting the Sales Message Start and Stop Times
To program the Sales message start time setting
1 Put the PRG key in the Mode key slot and turn it to the PRG position.
2 If you are prompted for a Manager Password, type the password number
and then press the Check key. If you did not program a Manager
Password, go to the next step.
3 Using the round Number keys, press 3, press the number of seconds you
want to delay as 2 digits, and press the Charge key.
MODE message Number of seconds before the
register turns into idle mode in
PRG, X, Z modes and the
message starts.
This message does not display in
REG modes.
Settings in
seconds: 00–99
Default=05
SALES message
start
Number of seconds after a sale is
complete before the message
starts.
The register must be set in REG
mode.
Settings in
seconds: 00 – 99
Default=10
SALES message
stop
Number of seconds the Sales
message runs before the Idle
message starts.
The register must be set in REG
mode.
Settings in
seconds: 00 – 99
Default=20
00 = No Sales
message appears