Royal Alpha 9180sc - Tax Rate Configuration; VAT Tax Rate Programming

26
(Continued) TAX RATE
VAT TAX RATE (commonly used in Europe)
FLAG 13 MUST FIRST BE PROGRAMMED AS FOLLOWS:
1. Turn the key to the "PRG" (PROGRAM) position.
2. If a PRG/Z Manager Password has been programmed, ENTER the (PASSWORD #), then PRESS the
[CHECK] key, or if you did not program a PRG/Z Manager Password, go to Step 3.
3. ENTER (13)(2), then PRESS the [VOID] key.
PROGRAMMING THE VAT TAX RATE:
"PRG" + (TAX #) + [TAX SHIFT] + (TAX RATE) + [FOOD STAMP]
1-4 0 - 99.999%
TAX 1 = VAT 1
TAX 2 = VAT 2
TAX 3 = VAT 3
TAX 4 = VAT 4
Example: 10% Tax Programming.
1. Turn the key to the "PRG" (PROGRAM) position.
2. If a PRG/Z Manager Password has been programmed, ENTER the (PASSWORD #), then PRESS the
[CHECK] key, or if you did not program a PRG/Z Manager Password, go to Step 3.
3. ENTER (1), PRESS the [TAX SHIFT] key, ENTER (10000), then PRESS the [FOOD STAMP] key.
TO PROGRAM A SECOND VAT TAX RATE:
Example: 5%
1. Turn the key to the "PRG" (PROGRAM) position.
2. If a PRG/Z Manager Password has been programmed, ENTER the (PASSWORD #), then PRESS the
[CHECK] key, or if you did not program a PRG/Z Manager Password, go to Step 3.
3. ENTER (2), PRESS the [TAX SHIFT] key, ENTER (5000), then PRESS the [FOOD STAMP] key.