Royal Alpha 9180sc - Taking Clerk Reports

71
X/Z MANAGEMENT REPORTS (Continued)
TO TAKE A CLERK REPORT
"X" or "Z" +
[CLERK/FS SHIFT]
1. Turn the key to the "X" or "Z" position as desired.
2. If an "X" or a PRG/Z Manager Password has been programmed, ENTER the (PASSWORD #), then
PRESS the [CHECK] key, or if you did NOT program an "X" or a PRG/Z Manager Password, go to Step
3.
3. PRESS the [CLERK/FS SHIFT] key.
Important: A Clerk Reading must be closed out in the "Z" position.
┌────────────────────────────┐
│ ************************ │
│ * YOUR RECEIPT * │
│ * THANK YOU * │
│ * * │
│ ************************ │
│ 01-24-99 MC #:1234 ───┼── MACHINE NUMBER
│ │
CLERK NO. or NAME │ CLERK X │
WILL PRINT ─────────┼─ CLERK 1 │
(if programmed) ┌┼─ 0023 *493.47 ───┼── SALES TOTAL OF CLERK #1
││ ANNE SMITH │ (includes tax)
ACTIVITY COUNTER ──┴┼─ 0010 *207.90 ───┼── SALES TOTAL OF CLERK #2
(# of transactions │ CLERK 3 │ (includes tax)
rung up by each │ 0000 *0.00 │
clerk) │ CLERK 4 │
│ 0000 *0.00 │
│ CLERK 5 │
│ 0000 *0.00 │
NOTE: All 30 clerks │ CLERK 6 │
will print │ 0000 *0.00 │
│ CLERK 7 │
│ 0000 *0.00 │
│ CLERK 8 │
│ 0000 *0.00 │
│ CLERK 9 │
│ 0000 *0.00 │
│ CLERK 10 │
│ 0000 *0.00 │
│ CLERK 11 │
│ 0000 *0.00 │
│ CLERK 12 │
│ 0000 *0.00 │
│ CLERK 13 │
│ 0000 *0.00 │
│ CLERK 14 │
│ CLERK 30 │
│ TOTAL *701.37 │
│ │
│ AM10-28 0038 │
└────────────────────────────┘