Royal Alpha 9180sc - Taking Full Reports (End-of-Day, Weekly;Monthly)

73
X/Z MANAGEMENT REPORTS (Continued)
TO TAKE A (Z or END-OF-DAY) FULL REPORT
"X" or "Z" + [AMT TEND/TOTAL]
1. Turn the key to the "X" or "Z" position as desired.
2. If an "X" or a PRG/Z Manager Password has been programmed, ENTER the (PASSWORD #), then
PRESS the [CHECK] key, or if you did NOT program an "X" or a PRG/Z Manager Password, go to Step
3.
3. PRESS the [AMT TEND/TOTAL] key.
To issue a duplicate "Z" Report, press the #/ST/NS key and the AMT TEND/TOTAL key. If other keys are pressed after
the first "Z" Report printing, the duplicate "Z" Report will not print. To disable the duplicate "Z" Report printing feature,
Flag 25 must be changed (see Page 36).
Important: A Full Reading must be closed out in the "Z" position.
SEE ILLUSTRATION OF A FULL REPORT ON THE NEXT PAGE.
TO TAKE A (WEEKLY or MONTHLY) FULL REPORT
"X" or "Z" + (99) + [AMT TEND/TOTAL]
1. Turn the key to the "X" or "Z" position as desired.
2. If an "X" or a PRG/Z Manager Password has been programmed, ENTER the (PASSWORD #), then
PRESS the [CHECK] key, or if you did NOT program an "X" or a PRG/Z Manager Password, go to Step
3.
3. PRESS (99), then PRESS the [AMT TEND/TOTAL] key.
SEE ILLUSTRATION OF A (WEEKLY or MONTHLY) FULL REPORT ON THE NEXT PAGE.