Royal Alpha 9180sc - To Take a Plu Report

72
(Continued) X/Z MANAGEMENT REPORTS
TO TAKE A PLU REPORT
"X" or "Z" + [PLU]
1. Turn the key to the "X" or "Z" position as desired.
2. If an "X" or a PRG/Z Manager Password has been programmed, ENTER the (PASSWORD #), then
PRESS the [CHECK] key, or if you did NOT program an "X" or a PRG/Z Manager Password, go to Step
3.
3. PRESS the [PLU] key.
Important: A PLU Reading must be closed out in the "Z" position.
┌────────────────────────────┐
│ ************************ │
│ * YOUR RECEIPT * │
│ * THANK YOU * │
│ * * │
│ ************************ │
│ 01-24-99 MC #:1234 │
│ │
│ PLU X │
│ 0007 ─────────┼── SALES COUNTER
PLU DESCRIPTION ──┼─ APPLE *7.57 ───┼── SALES TOTAL
or │ 0003 │
PLU NUMBER ───────┼─ PLU No 002 *9.87 │
(if no description │ 0003 │
is programmed) │ PLU No 003 *17.97 │
│ 0001 │
│ PLU No 004 *0.07 │
│ TOTAL *35.48 ───┼── TOTAL SALES OF ALL PLUs
│ │
TIME REPORT WAS TAKEN ──┼───────── AM11-35 0048 │
└────────────────────────────┘
TO TAKE A SELECTIVE PLU SALES REPORT
This report prints sales totals for a selected range of PLUs. For example, to print a report for PLUs 10-50:
1. Turn the key to the "X" position.
2. If an "X" Password has been programmed, ENTER the (PASSWORD #), then PRESS the [CHECK]
key, or if you did NOT program an "X" Password, go to Step 3.
3. Enter the Starting PLU Number 010 (must be 3 digits).
4. Enter the Ending PLU Number 050.
5. PRESS the [PLU] key.
"X" + (Type the Starting PLU Number) + (Type the Ending PLU Number) + [PLU]
001-1600 (3 digits) 1-1600 (3 digits)