Royal Alpha 9180sc - No-Sale, Reference Number, and Fraction Sales

53
TRANSACTION EXAMPLES FOR OPERATING THE CASH REGISTER
NOTE: Turn the key to the "REG" (REGISTER) position for registering sales transactions.
IMPORTANT: It is not necessary to press the Decimal Point when ringing up a price.
REMINDER: If Clerk Numbers are programmed, be sure to ENTER the (CLERK #), then PRESS the
[CLERK/FS SHIFT] key before ringing up a sale.
In the examples below, Department 1 is programmed as taxable with a 6% (TAX 1) rate and Clerk #1 is used.
EXAMPLE 7: NO-SALE FUNCTION - (Used primarily to open the drawer without ringing up a sale. For example, to
give change):
10-15-2002 MC #:1234
1. PRESS the [#/ST/NS] key.
NO SALE
Note: The number of times the No-Sale key is used
will be monitored on the Management Reports. AM10-59 0018
EXAMPLE 8: REGISTERING A REFERENCE NUMBER - (Used to print a number, up to 10 digits, to identify an
invoice number, credit card number or any other number on receipts. Ring up the number 1234567 in a
standard sale):
10-15-2002 MC #:1234
1. ENTER (1234567), PRESS the [#/ST/NS] key. 1234567 #
2. ENTER (100), PRESS the [DEPARTMENT 1] key. DEPT 1 *1.00 T1
3. PRESS the [AMT TEND/TOTAL] key. *0.06 T1
----------------------------------------
Note: The use of the reference number is not recorded TOTAL *1.06
in any activity counter or sales totals on the CASH *1.06
Management Reports.
AM10-59 0019
EXAMPLE 9: MULTIPLYING BY A FRACTION - (Multiply the quantity of 1.25, i.e., 1¼ yards of fabric at $1.00 in
Department 1):
10-15-2002 MC #:1234
1. ENTER (1.25), then PRESS the [QTY/DATE] key. 1.25 X
Note: When multiplying by a fraction it is 1.00 @
necessary to use the decimal point. DEPT 1 *1.25 T1
2. ENTER (100), then PRESS the [DEPARTMENT 1] key. *0.08 T1
3. PRESS the [AMT TEND/TOTAL] key. ----------------------------------------
TOTAL *1.33
Note: The range of numbers from .01 to 999.99 can CASH *1.33
be used when ringing up the quantity of an item.
AM10-59 0020