55
TRANSACTION EXAMPLES FOR OPERATING THE CASH REGISTER
NOTE: Turn the key to the "REG" (REGISTER) position for registering sales transactions.
IMPORTANT: It is not necessary to press the Decimal Point when ringing up a price.
REMINDER: If Clerk Numbers are programmed, be sure to ENTER the (CLERK #), then PRESS the
[CLERK/FS SHIFT] key before ringing up a sale.
In the examples below, Department 1 is programmed as taxable with a 6% (TAX 1) rate and Department 2 is
programmed for no tax and Clerk #1 is used.
EXAMPLE 13: EXEMPTING TAX ON AN ITEM - (Assume the Department 1 key is programmed as a taxable
department. Ring up a $1.00 item in Department 1 without charging tax):
10-15-2002 MC #:1234
1. PRESS the [NON TAX] key.
2. ENTER (100), then PRESS the [DEPARTMENT 1] key. DEPT 1 *1.00
3. PRESS the [AMT TEND/TOTAL] key. -----------------------------------------
TOTAL
*1.00
CASH *1.00
AM10-59 0024
EXAMPLE 14: EXEMPTING TAX ON AN ENTIRE SALE - (Assume the Department 1 key is programmed as a taxable
department. Ring up a $1.00 item and a $1.50 item in Department 1 without charging tax):
10-15-2002 MC #:1234
1. ENTER (100), then PRESS the [DEPARTMENT 1] key.
2. ENTER (150), then PRESS the [DEPARTMENT 1] key. DEPT 1 *1.00 T1
3. PRESS the [NON TAX] key. DEPT 1 *1.50 T1
4. PRESS the [AMT TEND/TOTAL] key. -----------------------------------------
TOTAL
*2.50
CASH *2.50
AM10-59 0027
EXAMPLE 15: ADDING TAX TO A NON TAXABLE DEPARTMENT - (Assume the Department 2 key is programmed
for no tax and the Department 1 key is programmed with a 6% TAX 1 tax rate. Ring up a $1.00 item in
Department 2, charging the 6% tax rate):
10-15-2002 MC #:1234
1. PRESS the [TAX SHIFT] key.
2. ENTER (100), then PRESS the [DEPARTMENT 2] key. DEPT 2 *1.00 T1
3. PRESS the [AMT TEND/TOTAL] key. *0.06 T1
-----------------------------------------
TOTAL
*1.06
CASH *1.06
AM10-59 0028
To Next Page
Loading...
